Refractory Tile and Slab Dimensions: Specify More Than Thickness
Large tiles and slabs need face dimensions, thickness, material, and installation detail on the same drawing.
A tile described only as one or two inches thick is not enough for manufacture or replacement planning. The face length and width, edge condition, and material grade influence fit, handling, and the number of pieces needed.
Describe the complete part
Provide a drawing with all face dimensions, thickness, holes or notches, corner details, and any required taper. Mark the hot face and whether the slab sits flat, stands vertically, or spans an opening. If an existing piece is damaged, measure several intact examples rather than copying one worn edge.
Plan handling and joints
Large pieces may need different lifting, packing, and support arrangements from standard bricks. Set the intended joint width and installation pattern so the supplied size aligns with the available space. Confirm whether a tile is pressed, cast, or cut from a larger shape, because the manufacturing method may affect tolerances.
Royal's custom sizes list includes tile and slab examples. Send a drawing for a new part or thickness.